Small and Medium Industries Development Corporation (SMIDEC) AJA EQS Certification (M) Sdn. Bhd. (AJA EQS)

(1)

1

FOR SMEs 2009

(2)

CONTENTS

Small and Medium Industries Development Corporation (SMIDEC) AJA EQS Certification (M) Sdn. Bhd. (AJA EQS)

Bureau of Innovation & Consultancy (BIP-UTM) Universiti Teknologi Malaysia

Centre For Continuing Education & Professional Development (CENFED)

FMM Institute

German-Malaysian Institute (GMI) Global Perfection Sdn Bhd (GPSB)

Halal Industry Development Corporation Sdn Bhd (HDC) Hasani Management & Consultancy Sdn Bhd (HASANI) Ikram Training and Infrastructure Development Institute (ITiDi) Infor Resources System Sdn Bhd (IRSSB)

Institute Global Management Sdn. Bhd (IGM) Institute of Marketing Malaysia (IMM)

Johor Skills Development Centre (PUSPATRI)

Kedah Industrial Skills and Management Development Centre (KISMEC)

Kulim Technology Management Sdn. Bhd. (KTMSB) Leadership Resources (Malaysia) Sdn. Bhd.

Malacca Industrial Skills Development Centre (MISDEC) Malaysia Productivity Corporation (MPC)

Malaysian Institute of Accountants (MIA) Malaysian Institute of Management (MIM)

Malaysian Technopreneurship Development Centre (MATDEC) Malaysian Nuclear Agency (NUCLEAR MALAYSIA)

MID-Commerce Solution Sdn. Bhd. (MCS)

5 9

15 21

27 33 41 47 53 57 61 67 71 75

81

89

95

101

113

119

137

143

147

153

(3)

3

Yayasan Pendidikan & Vokasional Wanita Malaysia (YPVWM)

157 163 171 177 189 299 205 211 217 225 233 239 243 249 255 259 263

269 275

281

(4)

(5)

Small and Medium Industries Development Corporation

(SMIDEC)

SMIDEC

(6)

(7)

7

Small and Medium Industries Development Corporation (SMIDEC)

Background

Small and Medium Industries Development Corporation (SMIDEC) Level 20, West Wing, Menara MATRADE, Jalan Khidmat Usaha, Off Jalan Duta, 50480 Kuala Lumpur

Tel : 03-6207 6000 Fax : 03-6201 6564 Toll-Free Line : 1-300-88-1801 E-mail : info@smidec.gov.my Web site : www.smidec.gov.my Small and Medium Enterprise (SMEs) assume an important and prominent role in supporting national economic development efforts. To support these SMEs, the Small and Medium Industries Development Corporation (SMIDEC) was established in May 1996 as a dedicated agency to promote and coordinate the development of SMEs in Malaysia.

SMIDEC provides assistance in building and strengthening capacity and capability of SMEs, through the provision of varied development programmes. In addition, financial assistance is also provided to SMEs to assist them in improving their efficiency and productivity for the overall enhancement of the companies competitiveness.

Skills Upgrading Programme

To enhance the capabilities of SMEs, SMIDEC implements the Skills Upgrading Programme, aimed at enhancing the skills and capabilities of SMEs. To date, SMIDEC has appointed 43 skills development centres and

professional training providers all over the country, to undertake both technical and soft skills training for SMEs.

Assistance is given to the SMEs in the form of 80% grant. SMEs incorporated under the Companies Act 1965 and enterprises incorporated under the Registration of Business Ordinance 1956 are eligible for this assistance.

In addition, SMEs that contribute to the Human Resource Development Fund (HRDF) are also eligible to utilize the levy that companies contribute to cover the 20% of the training costs. HRDF is managed by the Human Resource Development Berhad (HRDB), an agency under the ministry of Human Resource.

The National SME Development Council has appointed the Agency as coordinating authority to oversee and coordinate the overall training and human resource development for SMEs in the country. To ensure effective implementation, SMIDEC works closely with HRDB in integrating and coordinating the training programmes for SMEs across the country.

Further Information

(8)

SMIDEC BRANCH OFFICES

PENANG SMIDEC

No. 16, Lorong Perindustrian Bukit Minyak 2, Taman Perindustrian Bukit Minyak,

14100 Seberang Perai, Pulau Pinang.

Tel : 604-5024207/5024208 Fax : 604-5024205

TERENGGANU SMIDEC

Wisma UMNO Negeri Terengganu, Lot 3224,

Jalan Masjid Abidin,

20200 Kuala Terengganu, Terengganu.

Tel : 609-631 7870 Fax : 609-631 7721 JOHOR

SMIDEC Tingkat 11,

Lot 06 Menara TH, Jalan Ayer Molek, 80720 Johor Bahru, Johor Darul Takzim.

Tel : 607-221 4815 Fax : 607-221 4836 PAHANG

SMIDEC

Suite 9.01 & 9.02, Tingkat 9 Kompleks Teruntum, Jalan Mahkota, 25000 Kuantan, Pahang Darul Makmur.

Tel : 609-512 6677 Fax : 609-512 6678 SARAWAK SMIDEC

Tingkat 3, Menara Grand Lot 42, Section 46, Jalan Ban Hock, 93100 Kuching, Sarawak.

Tel : 6082-252 955/ 238 955/ 256 955 Fax : 6082-253 955

SABAH SMIDEC

Sabah Suite 3.23, 3rd Floor, Kompleks Asia City, Jalan Asia City, 88000 Kota Kinabalu, Sabah.

Tel : 6088-447 373 / 374

Fax : 6088-447 372

(9)

AJA EQS Certification (M) Sdn. Bhd.

AJA EQS

(10)

(11)

11

AJA EQS Certification (M) Sdn. Bhd.

Background

AJA EQS Certification (M) Sdn. Bhd.

(AJA Malaysia) was established in 1999 by two local quality pioneers and is one of the leading certification bodies in the Malaysia and Asia. We registered with Ministry of Finance since 2002 and accredited by Standards Malaysia under purview of Ministry Science, Technology and Innovation (MOSTI).

AJA Malaysia has initiated several programs such as hosting the first Quality Conference with theme

“Increasing Quality for the Nation”

in July 2006. Our effort was commended and blessed by various ministries. Introducing a new concept to trainings – “No Frills Trainings”.

Making Management Systems Training more understandable, interesting and affordable.

Conducting awareness campaign to various public and private sectors on the importance of management systems to name a few.

A partnership with AJA Malaysia means that we can customize our service to best meet your specific needs. We act as a one-stop center for Quality, Environmental, Safety and other international Standards.

Core Business

AJA Malaysia a homegrown international certification body and training provider. We are the first and only certification body certifies organization overseas under Standards Malaysia accreditation.

It is the policy of AJA Malaysia to provide a full range of services as possible in order that clients achieve any combination of registrations/

trainings without resource to a number of registration bodies or training providers. – We act as a

“one stop Academy” for international Standards. The result is a clear and objective promise to our customers, of what our quality of service will mean to them. In outline, we provide a cost effective professional Certification & Training Services, which minimizes disruption to the clients business by offering total flexibility within the limitations of our Accreditation requirements.

AJA Malaysia offers an extensive

suite of generic trainings by

experiences practicing specialist

(qualified auditors) to ensure

the participants understand and

(12)

Further Information

AJA EQS Certification (M) Sdn Bhd

G701, Block G, Phileo Damansara 1, Jalan 16/11, 46350 Petaling Jaya, Selangor Darul Ehsan.

Contact : Ms. Roslaini Khaidir/Ms. Sharifah Aishah Tel : 03-7955 1342

Fax : 03-7954 6485 E-mail : ajaeqs@pd.jaring.my Website : www.aja.com.my

enjoy the training. We provide In-house or public traditional or “No Frills”

development trainings to suit your financial needs.

Through out these 8 years, we have continuously assessed our performance moved forward to a practical common sense approach to Management System Certification and Trainings. To-date we have certified more than 800 clients and have trained more than 5 thousand clients in various industries and standards worldwide.

Merits

• Qualified Directors with more than 18 years experience in the certification and training industry.

• Trained and competent Managers, auditors, administration and customer service staff.

• Common sense auditing approach

• Ensure impartiality is applied throughout the certification process

• Customizing services to meet customers needs

• Complimentary trainings for our clients

• Fast response

• One stop Academy for standards services

• One to one Quality Clinic to help solve quality problems

• Friendly and approachable staff

• And a lot more

(13)

13

No Course Name Duration

(Days) Size

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

1,500.00 2,900.00

3,000.00 1,500.00 3,000.00 4,500.00

1,500.00

3,500.00 1,500.00 3,000.00 4,500.00

1,500.00 3,500.00

15 15

15 15 15 15

15

15 15 15 15

15 15 1 day

2 days

2 days 1 days 2 days 3 days

1 days

1 days 2 days ISO 9001:2000 QMS Awareness

ISO 9001:2000 QMS Analysis &

Interpretation

ISO 9001:2000 QMS Internal Auditor ISO 14001:2004 EMS Awareness ISO 14001:2004 EMS Initial Review ISO 14001:2004 EMS Analysis &

Interpretation

ISO 14001:2004 EMS Legal Requirement

ISO 14001:2004 EMS Internal Auditor OHSAS 18001:2007 Awareness OHSAS 18001:2007 Initial Review OHSAS 18001:2007 Analysis &

Interpretation

OHSAS 18001:2007 Legal Requirement OHSAS 18001:2007 Internal Auditor

Fees (RM)

Exclusive Training for SMEs - In House

(14)

No Course Name Duration

(Days) Size

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

90 90 90

90 98 98 98

98

98 98 98 98

98 98 110

110 110 110 110

15 15 15

15 15 15 15

15

15 15 15 15

15 15 15

15 15 15 15 1 day

1 day 2 days

2 days 1 day 2 days 3 days

1 day

2 days 1 day 2 days 3 days

1 day 2 days 2 days

2 days 3 days 2 days 3 days ISO 9001:2000 QMS Awareness

ISO 9001:2000 Initial Quality Review ISO 9001:2000 QMS Analysis &

Interpretation

ISO 9001:2000 QMS Internal Auditor ISO 14001:2004 EMS Awareness ISO 14001:2004 EMS Initial Review ISO 14001:2004 EMS Analysis &

Interpretation

ISO 14001:2004 EMS Legal Requirement

ISO 14001:2004 EMS Internal Auditor OHSAS 18001:2007 Awareness OHSAS 18001:2007 Initial Review OHSAS 18001:2007 Analysis &

Interpretation

OHSAS 18001:2007 Legal Requirement OHSAS 18001:2007 Internal Auditor Integrated Management System Awareness

Integrated Initial Review

Integrated Analysis & Interpretation Integrated Legal Requirement Integrated Internal Auditor

Fees (RM)

Public ‘No Frills’ Training (refer to our website www.aja.com.my for

details of training date)

(15)

Bureau of Innovation & Consultancy Universiti Teknologi Malaysia

BIP - UTM

(16)

(17)

17 Bureau of Innovation and Consultancy Industry Center, Technovation Park, Universiti Teknologi Malaysia (UTM) 81300 Skudai, Johor

Contact : Ms Hafizah Ithnin / Ms Nur Ammi Hamzah Tel : 07-5591550 / 07-5591512

Fax : 07-5576904

E-mail : hafizah@bip.utm.my /nurammi@bip.utm.my

Further Information Bureau of Innovation & Consultancy

Universiti Teknologi Malaysia Background

Universiti Teknologi Malaysia (UTM) “The Discovery University”

has embarked on aggressive R&D initiatives in advancing the culture and management of quality research in Malaysia through close collaboration with other universities and agencies. The pace of research and development activities in the country has moved into high gear with technological development and innovation taking centre stage.

Founded in 1993, the Bureau of Innovation & Consultancy (Biro Inovasi & Perundingan) is the right arm of UTM in promoting its various intellectual resources through its wide range of consulting, training and testing services.

BIP incorporated Teaching Factory and Pilot Plant concept by conducting its training programme under a real factory/plant condition.

The emphasis is more on practical

and hands-on skills training. The

syllabus and curriculum for the

courses have been reviewed by

expert from UTM and industries to

ensure sufficient input of theoretical

and management as well as

practical skills is incorporated in

order to achieve the highest level of

competency.

(18)

No Course Name Duration Fees (RM) Date

2 days

3 days

2 days

5 days

2 days

3 days 5 days

2 days

3 days

2 days 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

To Be Advised

To Be Advised To Be Advised

To Be Advised

To Be Advised 1,250.00

1,250.00

1,550.00

1,250.00

650.00

1,700.00

1,800.00

1,900.00

1,500.00

890.00

1,200.00 1,800.00

2,250.00

1,250.00

1,800.00

1,250.00 Herbal & Phytochemical Processing and

Industry

Herbal Product Formulations

Bioreactor Operation, Maintenance and Troubleshooting

Aromatherapy for Wellness and Productivity

Household and Personal Care Product Formulation

Cara Penanaman & Penggunaan Tumbuhan Herba

Certificate in Holistic Treatment i) Introductory : Anatomy and Physiology

ii) Intermediate : Holistic Massage

iii) Advanced : Aromatherapy

iv) Reflexology

Bio-organic Fertilizer Using EM Technology

Spa Management Post Natal Massage

GMP Facility For The Production Of Biopharmaceuticals

A Two-Day Course On Edible Bird’s Nest Industry

A Three Day Course On Skincare Product Development

Kaedah Penghasilan Minyak Kelapa Dara Serta Produk-Produk Hilirannya

TRAINING SCHEDULE 2009

BIOTECHNOLOGY & CHEMISTRY A.

(19)

19

No Course Name Duration Fees (RM) Date

2 days 2 days 2 days

2 days 2 days

2 days

2 days 14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

To Be Advised To Be Advised To Be Advised

To Be Advised

To Be Advised 950.00

750.00 750.00

950.00 950.00 950.00

1000.00 1000.00

1,900.00

1,800.00

1,300.00 Injection Moulding Maintenance

Mould Maintenance

Instruction of Injection Moulding Machine

& Control Board

Polymer Technology Polymer Material

Polymer Processing (Blown Film Extrusion)

Polyvinyl Chloride (PVC) Technology) Plastic Packaging for Food Industry

VACCINE 1

(Value Creation Acceleration Through Creativity And Innovation Experience) VACCINE 2

(Value Creation Acceleration Through Creativity And Innovation Experience) VACCINE 3

(Value Creation Acceleration Through Creativity And Innovation Experience) MOULDING TECHNOLOGY

MOULDING TECHNOLOGY

BUSINESS MANAGEMENT B.

C.

D.

(20)

(21)

Centre For Continuing Education &

Professional Development

CENFED

(22)

(23)

23

Centre For Continuing Education & Professional Development

Background

Established in 2004, CENTRE FOR CONTINUING EDUCATION &

PROFESSIONAL DEVELOPMENT (CENFED) was formerly known as the Skills Development Centre. Its initial function was to coordinate the development of skills development system for UMP students. As a result of a restructuring exercise, CENFED was given a new and expanded role in the development of human resources in the community.

CENFED is responsible for developing and disseminating

programmes on continuing education and professional development to the public focusing particularly on the working adults.

Its function has been expanded

to include the development and

coordination of retraining courses,

continuing education programmes,

skills development programmes and

professional development courses

for UMP. Most of its programmes

are designed to provide continuing

education opportunities for the local

industrial community and the general

public.

(24)

Further Information

Centre for Continuing Education & Professional Development Universiti Malaysia Pahang, Locked Bag 12

25000 Kuantan, Pahang Darul Makmur Contact : Mr. Zainal bin Bahari Tel : 09-549 2629 / 2086 Fax : 09-549 9378 / 2080 E-mail : cenfed@ump.edu.my Website : www.ump.edu.my

CENFED offers programmes spanning from those authorized by the relevant authorities such as the Department of Safety & Health Malaysia (DOSH) and National Institute of Occupational Safety & Health (NIOSH) to programmes tailor-made according to customer requirements.

Focusing mainly on areas related to the chemical, petrochemical and natural resources industry as well as the manufacturing and process industry UMP which is located in the state of Pahang the largest state in Peninsular Malaysia, is poised to play the vital role as a leading higher education institution in the country’s East Coast Economic Region (ECER).

CENFED is also an authorized training provider for the following agencies:

• Pembangunan Sumber Manusia Berhad (PSMB)

• Department of Safety & Health (DOSH)

• Department of Skills Development (DSD)

• Construction Industry Development Board (CIDB)

• Small & Medium Industries Development Corporation (SMIDEC)

(25)

25 Januari – Disember 2009

No Course Name Duration

(Days) Fees

(Per Pax) Dates

2 days

3 days

2 days

3 days

2 days

22 days 1

2

3

4

5

6

7

8

9

30

20

30

25

14 – 15 Apr 04 – 05 Aug

24 – 25 Mar 24 – 25 Jun 29 – 30 Sep 22 – 23 Dec 27 – 29 Jan 21 – 23 Apr 14 – 15 Jan 14 – 15 Apr 15 – 16 Jul 20 – 21 Oct 03 – 04 Mar 02 – 03 Jun 08 – 09 Sep 02 – 03 Dec 08 – 09 Dec 18 – 19 Mar 16 – 18 Jun 20 – 22 Oct 16 – 17 Jun 10 – 11 Nov Start 07 Feb

(weekend) Start 16 May 2009 (weekend) Start 05 Sep

(weekend) 500

500

750

500

750

500

4000 A Solution Finding and

Decision

Making for Result Program Visio 2002 Professional (Introduction)

Excellence in Frontline Management Mission Critical Risk Management

Project Management Using MS Project 2000

Supervisory Skills Course

Strategic Planning Course

Confined Space

Safety & Health Officer Programmes

Class Size

(26)

(27)

FMM Institute

FMM

(28)

(29)

29

FMM Institute

Centre for Professional Development Background

FMM Institute was incorporated as a separate company of the Federation of Malaysian Manufacturers (FMM) on January 12, 1999. This effort was specifically to expand and focus on its training functions, in line with the objectives of FMM to develop the potentials and enhance the skills of personnel at every level in the industry. This will create a pool of manpower trained in all aspects of management capabilities and industrial skills to face the challenges as the country moves into the status of an industrialised nation. FMM Institute has a total of seven Branches (Northern, Perak, Negeri Sembilan, Selangor, Malacca, Eastern and Johor) and

three Representative Offices (Kedah, Sabah and Sarawak).

FMM Institute offers a wide range

of functional corporate training

programmes to cater to the diverse

needs of the manufacturing and

services sectors. In addition,

continuing professional education

provides the opportunity for the

working personnel to gain the

necessary qualifications to upgrade

themselves both professionally as

well as for self-development. This

opportunity is made possible through

FMM Institute’s Certificate and

Diploma programmes in selected

areas of industrial and management

skills.

(30)

Further Information

FMM Institute

Centre for Professional Development

Wisma FMM, No. 3, Persiaran Dagang, PJU 9 Bandar Sri Damansara, 52200 Kuala Lumpur Contact : Ms Amy Thong/Ms Ong Li Choo Tel : 03-62761211

Fax : 03-62756064

E-mail : amy@fmm.org.my / lichoo@fmm.org.my Website : www.fmm.edu.my

FMM Institute’s programmes can also be specially customised to meet the training needs of specific industries and be conducted on in- house basis. Programme outlines and objectives are discussed with the companies and facilitators will be selected to develop the programmes accordingly. All in- house programmes are packaged to be cost effective for companies with no compromise on the quality of the programmes and the desired results.

FMM Institute, Head Office obtained its Institution of Private Higher Education (IPTS) status from the Ministry of Higher Education on July 19, 2001 and currently offers four Diploma programmes:

Manufacturing Management,

Logistics Management, Human

Resource and Industrial Relations

and Business Management. Efforts

are ongoing to offer Degree and

Master level programmes specially

designed to provide life long

education for employees in the

manufacturing and services sectors.

(31)

31 Januari – Disember 2009

No Course Name Duration

(Days) Fees

2

2 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

10

Feb 16-17, Jun 15-16 &

Oct 12-13 Apr 6-7, Aug 10-11 &

Dec 9-10 Jan 12-13 &

May 6-7 Mar 4-5 &

July 22-23

Apr 13-14, Aug 24-25 &

Nov 16-17 Mar 16-17, July 27-28 &

Oct 26-27 Feb 16-17, June 8-9 &

Oct 15-16 Feb 16-17, June 22-23 &

Nov 2-3 Mar 30-31, July 15-16 &

Nov 18-19 Apr 20-21, Jul 13-14 &

Nov 9-10 Mar 2-3, July

8-9 &

Dec 14-15 May 11-12 &

Oct 19-20 950

950

950 Effective Purchasing

Management

Operasi Stor dan Gudang

Inventory and Stores Management

Materials Planning and Control Strategic Procurement, Negotiation Skills and Cost Reduction Techniques Effective Logistics Management

Production Planning and Control

Teknik Kawalan Kualiti untuk QC

Penyelenggaraan Asas untuk Juruteknik

Basic Electricity and Troubleshooting

Safety and Health at Workplace

Occupational First Aid Skills and CPR

INCOTERMS and Its Interpretation in International Trade and Shipping Documentation

Class Size

(32)

No Course Name Duration (Days) Fees

2

2 14.

15.

16.

17.

18.

10

Apr 9-10, Aug 13-14 &

Nov 19-20 Feb 26-27, June 25-26 &

Sep 10-11 Apr 1-2, Aug

17-18 &

Nov 11-12 Feb 23-24, June 22-23 &

Oct 26-27 Apr 29-30,

Aug 3-4 &

Dec 16-17 950

950

950 Seven Leadership Skills of

Highly Effective Supervisors (Mandarin)

Motivating Employees for Higher Productivity (Mandarin)

Sikap Kerja Positif

Clerical Development Programme

Managing Conventional Record and Files Effectively

Class Size

Notes:

• Fees quoted above are before SMIDEC grants. SMIDEC grants up to 80% of course fee.

• FMM Institute reserves the right to cancel or reschedule any of the above programmes.

(33)

German-Malaysian Institute

GMI

(34)

(35)

35

German-Malaysian Institute Background

GMI is a joint venture project between Governments of Malaysia and Germany. It is a centre for advanced skills training in the fields of Production Technology and Industrial Electronics. The project was launched in 1991 and GMI started its operation in 1992.

The main objective of GMI is to support Malaysian industry by producing highly skilled technician/

technologies in the fields of Precision Engineering (Mould, Tool and Die, Product Design & Manufacturing, CNC Precision Technology, Mechatronics, Electronics &

Information Technology, Process

Instrumentation & Control and

Network Security. GMI graduates are

expected to combine their theoretical

know-why with practical know–how

in the design, manufacture, operation,

maintenance, fault analysis and

repair of complex production plant,

machinery, equipment, tools and the

product being manufactured.

(36)

GERMAN-MALAYSIAN INSTITUTE

Jalan Ilmiah, Taman Universiti, 43000 Kajang, Selangor Darul Ehsan Contact : Ms Azrina Aziz

Tel : 03-8921 9000 Fax : 03-8921 9001 E-mail : enquiry@gmi.edu.my Website : www.gmi.edu.my

Further Information Core Business

In line with it’s objective to train and upgrade the middle-level (semi professional) workforce for industry, GMI conducts the following training programs:

• Industrial Diploma (Full Time) – target group are fresh school leavers/

graduates from SPM, IKM, ITI or Polytechnics and SKM Level 2 holder

• Industrial Diploma (Part-Time) – target group are current employees and potential entrepreneur

• Short Courses (Day-Time/Evening/Weekends) – target group are current employees and potential entrepreneur

• Technical Seminars on current issues related to technology

• Train the trainers program

• Industrial Projects – GMI undertakes industrial projects commissioned by

industry on a commercial basis. The types of project vary from complete

design, fabrication and testing of automated systems to the machining of

parts.

(37)

37

No Course Name Duration

(Day/Hours) Fees (Per Pax) Max

Pax Dates

4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 5 Days/40 hrs

12 Days/96 hrs 9 Days/72 hrs

9 Days/72 hrs 3 Days/24 hrs 3 Days/24 hrs

3 Days/24 hrs 2 Days/15 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 4 Days/30 hrs 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised 1045

1375 1045 1375 1045 1,375 1,375 2000 1,045 1,375 1,100 4,000

6,000 8,000

8,000 650 650

960 600 1,200 1,200 1,200 1,200

10 10 10 10 10 10 10 10 6 6 6 12

10 10

10 10 10

10 8 8 8 8 8 Fundamental CNC Milling

CNC Milling-Advanced Milling 2 Fundamental CNC Turning Advanced CNC Turning EDM Fundamentals Advanced EDM Die Sinking Advanced EDM Wire Cut CAD-Catia V4

CAD Fundamentals CAD/CAM Fundamentals CAD/CAM Advanced 1

Fundamental Of Mechanical Plastic Part Design

Product Design

Advanced Mechanical Plastic Part Design

Advanced Plastic Mold Design Technical Communication 1 Technical Communication 2

Fundamental Press Tool Technology Bending Operation & Bending Dies Die Construction & Design 1 Die Construction & Design 2 Die Construction & Design 3 Die Maintenance & Press Machine Operation

COURSES OFFERED BY GERMAN-MALAYSIAN INSTITUTE 2009

CNC & CAD/CAM TECHNOLOGY

TOOL & DIE TECHNOLOGY A.

B.

(38)

No Course Name Duration

Pax Dates

1 Day/8 hrs 3 Days/24 hrs 4 Days/30 hrs 1 Day/8 hrs

4 Days/30 hrs

3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs

3 Days/24 hrs

4 Days/30 hrs 5 Days/40 hrs 24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised

To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised

To Be Advised To Be Advised 400

800 1,100 400

1,200

1,200 1,200 1,200

1,045

1,200 1,200 8000

800 1,000 800 1000 1200 800

1,000

1,500 2,000

8 8 8 8

8

8 8 8

10

10 10 10

14 14 14 14 10 10

10

10 10 Fundamental Of Plastic Processing

Fundamental Of Mould Technology Basic Grinding

Troubleshooting For Injection Moulding

Mould Maintenance & Injection Moulding Machine

Plastic Mould Construction Design 1 Plastic Mould Construction Design 2 Plastic Mould Construction Design 3

Coordinate Measuring Machine (CMM)

Geometrical Dimensioning &

Tolerancing (GDT) Conventional Turning Conventional Milling Engineering Metrology

Basic Pneumatics Electro-Pneumatics Advanced Pneumatics Basic Hydraulics Electro-Hydraulics

Introduction To Programmable Logic Controller

Programmable Logic Controlller (Part 2)

Fundamentals Of Industrial Robotics Industrial Robotics

Simulation And Programming Solidworks – Basic MOULD TECHNOLOGY

MATERIALS, QUALITY & MACHINING TECHNOLOGY

AUTOMATION & MECHATRONICS TECHNOLOGY C.

D.

E.

(39)

39

Pax Dates

3 Days/24 hrs 4 Days/30 hrs 3 Days/24 hrs 5 Days/40 hrs 5 Days/40 hrs 3 Days/24 hrs

4 Days/30 hrs 3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs

4 Days/30 hrs

5 Days/40 hrs

3 Days/24 hrs 5 Days/40 hrs 2 Days/16 hrs 47.

48.

49.

50.

51.

52.

53.

54.

55.

56.

57.

58.

59.

60.

61.

62.

63.

64.

65.

66.

67.

68.

To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised

To Be Advised To Be Advised To Be Advised 700

1450 1,000 1,450 1,450 1,000

600 700

700 550 900

950 550 700 800

840

1300

980

770

980 500 800

10 10 10 10 10 10

10 10

10 10 10

10 10 10 10

10

10 10 10 Fault Analysis (Electronics Circuit)

Communication Technology Microcontrollers

Data Communication Principles Data Communication Systems Power Electronics & Drive Techniques

Overview Of Electronics Fundamentals Of Electronics &

Digital System

Basic Analogue Electronics Basic Electronics Workshop Microprocessor And Microcontroller Based System

Foundation To Power Electronics Operational Amplifiers (Op-Amp) Analog Communication & Telephony Digital Communication & Error Control

Electrical Machines (Operational, Troubleshooting & Maintenance) Motor Control With Contactor Programming

Industrial Process Control &

Instrumentation

Sensors And Measurement Technology

Sensor In Automation Technology Domestic Electrical Installation Protection Devices In Electrical Installation

ELECTRONICS SYSTEM & COMMUNICATION

PROCESS & INSTRUMENTATION CONTROL F.

G.

(40)

Pax Dates 4 Days/30 hrs

4 Days/30 hrs

5 Days/40 hrs

4 Days/30 hrs

3 Days/24 hrs

3 Days/24 hrs 3 Days/24 hrs 3 Days/24 hrs 5 Days/40 hrs 5 Days/40 hrs 5 Days/40 hrs 5 Days/40 hrs

2 Days/16 hrs 3 Days/24 hrs 2 Days/16 hrs 69.

70.

71.

72.

73.

74.

75.

76.

77.

78.

79.

80.

81.

82.

83.

84.

85.

86.

87.

To Be Advised

To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised To Be Advised

To Be Advised To Be Advised To Be Advised 800

1,200

1,900

1,000 2,200

2,200

600

500

300

1,500 1,500 800 2,500 3,000 2,500 2,500

650 650 650

10

10 10

10

10 10 10 10 10 10 10

10 10 10 Low Voltage Switch Gear And Motor

Control

Introduction To Instrumentations Calibration And Maintenance Introduction To Distributed Control System

Linux Fundamentals Linux Network Administration (Optional Rhce Exam) Linux System Administration (Optional Rhce Exam)

Interactive Multimedia Development With Macromedia Flash Adobe Studio 8 (CS2)

Web Page Design And Publishing With Macromedia Dreamweaver MX Graphic Editing And Optimization With Macromedia Fireworks MX Java Beginner

Java Intermediate C Programming My SQL Oracle PHP VB.Net

Engineering Report Writing Technical Presentation Dynamic Presentation Skills COMPUTING NETWORK

RESOURCES DEVELOPMENT CENTRE H.

I.

(41)

Global Perfection Sdn Bhd

GPSB

(42)

(43)

43

Global Perfection Sdn Bhd Background

Global Perfection Sdn Bhd is an approved training provider of Small and Medium Industries Development Corporation (SMIDEC), Class A certificates of Pembangunan Sumber Manusia Berhad (PSMB) and Institut Keusahawanan Negara (INSKEN). We provide training to government, semi government, private organizations and individuals since 2001 especially in areas of soft and technical skills to meet the industrial and corporate training requirement.

Further Information

Global Perfection Sdn Bhd

No 26B, Jalan Pesta 1/1, Taman Tun Dr Ismail Jalan Bakri, 84000 Muar, Johor

Contact : Ms Zurin Zurina Atan Tel : 606-953 3608 Fax : 606-953 0597 E-mail : cdin@streamyx.com

Website : www.globalperfection.tripod.com

(44)

Year : 2009

3 Days

2 Days

3 Days

2 Days

3 Days

2 Days 2 Days

2 Days

2 Days 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14

15.

15-30

15-30 15-30

15-30

9-11 Jan 24-26 Jul 7-8 Nov 16-18 Jan 30-31 Oct 3-4 Jan 27-28 Nov

6-8 Feb 24-26 Aug 21-22 Feb 17-18 Jul 07-08 Mac 15-16 Aug 30-31 May 28-29 Mac 21-22 Nov 04-05 April 19-20 Oct 15-16 Jun 15-16 Dec 10-13 April 15-17 May 14-16 Sept 04-05 May 14-15 Feb 27-28 Jun 03-04 Nov 16-17 Mac 01-02 Aug 23-24 April 5-6 Dec 06-07 Jun 19-20 Dec 600

600

600 600

600

600 Mencari Peluang Perniagaan

Leadership, Teamworking &

Communication Workshop Kemahiran Perundingan Dalam Perniagaan

Mengenalpasti dan Memilih Perniagaan

Kursus Kecemerlangan Perhubungan Pelanggan Kemahiran-Kemahiran Dalam Perniagaan

Kursus Pembungkusan Dan Perlabelan

Kemahiran Pengurusan Kewangan

Kursus Kemahiran Komunikasi

& Persembahan

Menulis Rancangan Perniagaan

Kursus Pengiklanan Change Management

*Implementation 5S at Workplace

Finance For Non Financial Manager

Business Communication For Workers

No Course Name Duration

(Days) Fees

(Per Pax) Class Size Dates

(45)

45

2 Days

4 Days

2 Days

2 Days 16.

17.

18.

19.

20.

21.

22.

23.

15-30

11-12 Jul

23-24 Jan 8-9 Sep 10-11 Feb

30-31 Jul 2-3 Mac 10-11 Aug 13-16 Apr

25-26 Feb 16-17 Nov 25-26 May 27-28 Dec 29-30 Aug 26-27 Dec 7000

600

750

625

600

600 Skills of Handling Foreign

Workers

Pensijilan Halal & Undang- Undang Malaysia Prosedur Persijilan Halal Malaysia

Penggunaan Internet & Web Dalam Perniagaan Penggunaan UBS Dalam Perniagaan

Stress Management

Think Out Of The Box

Empowering Safety and Health Committee

No Course Name Duration

(Days) Fees

(Per Pax) Class Size Dates

(46)

(47)

Halal Industry Development Corporation Sdn Bhd

(HDC)

HDC

(48)

(49)

49

Halal Industry Development Corporation Sdn Bhd (HDC)

Background

The Halal Industry Development Corporation (HDC) is an initiative by the Malaysian Government to ensure the integrated and comprehensive development of the national halal industry. HDC was officially incorporated on 18th September 2006 as a private company that is intended to coordinate efforts to review standards, develops of local industry, promotes Malaysian halal products and services in international markets, as well as support investments in the domestic and international halal sector.

As a further step in maintaining this long-term commitment to the development of halal industry, Malaysia has established the world’s first development corporation specifically dedicated to the halal sector. Our Malaysian government has long recognized the potential of the global market for halal products and services. Malaysian certification procedures and the national MS1500:2004 Halal Standard have received widespread recognition for promoting excellence in the field of halal-compliance.

HDC is fully committed in fulfilling Malaysia’s vision of playing a leading role in the development of halal as a powerful market force, bringing the benefits of halal products and services to both Muslims and non- Muslims throughout the whole world.

Halal Integrity Division functions to protect the integrity of halal through developing a regulatory framework, a comprehensive standard, efficient certification processes, and world- class R&D and training facilities.

Besides that, it is one of the significant roles of Halal Integrity Division to create a world class halal training services.

The HDC Halal Training Programme

was prepared in phases to establish

Malaysia as a global hub for halal

training. It includes a general training

on halal for public and technical

trainings for auditors and certifiers

as well as training for halal industry

professionals. Academic courses

are currently offered at various

universities such as Universiti Putra

(50)

Further Information

Halal Industry Development Corporation Sdn Bhd (HDC)

5.02 Level 5 KPMG Tower, First Avenue, Persiaran Bandar Utama Bandar Utama, 47800 Petaling Jaya, Selangor, MALAYSIA Contact : Ms. Norhaizam / Ms. Marina / Ms. Siti Zainab Tel : 03-7965 5555 ext 568/ 572/ 573

Fax : 03-7965 5500

E-mail : training@hdcglobal.com Website : training@hdcglobal.com Malaysia and the International Islamic University Malaysia. A network of academic institutions and research facilities is being created to provide the benchmarking for HDC training modules of international stature.

At HDC we take great pride in our

training programme, which is why

we are very particular in the trainers

that will be conducting the training

programme to you. We guarantee

you that our trainers are well

qualified and acquire the required

accreditation from prestigious

universities around the globe.

(51)

51

No. Course Name Duration

(Days) Fees Size

(RM) Date

1

2

2 1.

2.

3.

4.

25

12 Jan 09 9 Feb 09 16 Mar 09 13 Apr 09 4 May 09 15 Jun 09 13 Jul 09 10 Aug 09 12 Oct 09 9 Nov 09 14 Dec 09 1-14 Jan 09

3-4 Feb 09 10-11 Mar 09

7-8 Apr 09 12-13 May 09 16-17 Jun 09 7-8 Jul 09 4-5 Aug 09 6-7 Oct 09 10-11 Nov 09

8-9 Dec 09 11-12 Feb 09 18-19 Mar 09 20-21 Apr 09 5-6 May 09 10-11 Jun 09

15-16 Jul 09 12-13 Aug 09 14 – 15 Oct 09

4-5 Nov 09 2-3 Dec 09 17-18 Feb 09 24-25 Mar 09 28-29 Apr 09 20-21 May 09 24-25 Jun 09 22-23 Jul 09 20-21 Oct 09 18-19 Nov 09 16-17 Dec 09 500

950

950 HAP01 – Understanding Halal

HAP02 – Understanding the Halal Industry

HIP01 – Best Halal Practices in the Food

Industry (for Managers)

HIP02 – Effective Halal Operations in the

Food Industry (for Executives/

Supervisors)

COURSES OFFERED BY HALAL INDUSTRY DEVELOPMENT

CORPORATION (HDC) 2009

(52)

(53)

Hasani Management & Consultancy Sdn Bhd

HASANI

(54)

(55)

55

Hasani Management & Consultancy Sdn Bhd Background

Further Information

Hasani Management & Consultancy Sdn Bhd 25 C, Bangunan Ban Bee, Jalan Kampung Baru, 08000 Sungai Petani, Kedah

Contact : Mr. V Ramakrishnan ( Marketing Manager) Tel : 04 - 425 2800 / 424 4800

Fax : 04 - 425 3786

E-mail : hasanimanagement_sp@yahoo.com HASANI group of companies stands at the forefront of quality corporate management, management system consultation and training in the region. Established in 1993 by Tn.

Haji Farook Hasan bin Mohamed Hussain, it is a sole-proprietorship and 100% Bumiputra owned.

HASANI is well recognized and acknowleged as a pioneer in providing consultation and training services to both public and private sectors. It has an impressive and comprehensive network of subsidiary companies.

HASANI has assisted numerous companies achieve business excellence by embracing the use state of the art technical and management systems and

principles. We have extensive knowledge and practical experience in a wide spectrum of industries. Our clientele includes both the public and private sectors comprising of multinational corporations, public listed companies, goverment organizations, non-profit organizations, financial institutions, trading and marketing service companies and small and medium enterprises.

What we offer

• Consultation Services

• Public Training Programs

• In House Training Programs

(56)

TRAINING CALENDAR 2009

No. Course Name Duration

(Days) Fees

(RM) Dates

2 days

2 days 1.

2.

3.

4.

5.

25

7&8 Jun 9&10 Jul 16&17 Aug

6&7 Sep 29&30 Oct 29&30 Nov 27&28 Dec 19&20 Jul 8&9 Aug 13&14 Sep

11&12 Oc 8&9 Nov 13&14 Dec 21&22 Jun 30&31 Jul 27&28 Aug 29&30 Sep 22&23 Oct 24&25 Nov 4&5 Dec 28&29 Jun

5&6 Jul 20&21 Sep 18&19 Oct 22&23 Nov 20&21 Dec 14&15 Jun 23&24 Jul 20&21 Aug 24&25 Sep 4&5 Oct 12&13 Nov 24&25 Dec 800

800

800 Excellent Customer Service

Maximize Your Presentation Skills

Professional Image

Psychological Selling

Finance For Non-Finance Managers

Class Size

(57)

Ikram Training and Infrastructure Development Institute (ITiDi)

ITiDi

(58)

(59)

59 Ikram Training and Infrastructure Development Institute (ITiDi)

Taman Ilmu Ikram, Jalan Serdang, 43000 Kajang, Selangor Contact : Mr. Rais bin Ma’at

Tel : 03 -8738 3388 / 012 - 3169200 Fax : 03 - 8736 9908

E-mail : itd@ikram.com.my Website : www.itidi.com.my

Further Information Ikram Training and Infrastructure Development Institute (ITiDi)

Background

Ikram Training and Infrastructure Development Institute is an engineering-based training institute and provide training to government, semi government bodies, private organizations and individuals since 1997.

ITiDi is fully equipped with necessary infrastructure required for training such as fully air-conditioned training rooms, engineering workshops, computer labs, auditorium and multipurpose hall. Three hostel blocks and recreational facilities are also available for training participants.

ITiDi has now diversified from Engineering - based training to Information Technology, Management, Service Industry as well as other contemporary courses that can be customized to client’s need.

To ensure quality courses offered to

the clients ITiDi has been awarded

ISO 9001: 2000 status in 2002.

(60)

No Course Name Fees Duration (RM) Class

Size Date

1,120 1,400 280 1,050 1,050 1,750 1,400

1,400 1,750 4 days

4 days 1 day 3 days 3 days 5 days 4 days

4 days 5 days 1.

2.

3.

4.

5.

6.

7.

8.

9.

TBA TBA TBA TBA TBA TBA TBA

TBA TBA 20

15 20 20 20 20 20

20 20 Electrical Installation Design

Electrical Motor Control Power Factor Capacitors Bank Main Switchboard ACB, MCCB Penatahan Geganti Perlindungan Automobile Electrical Wiring System Advanced Automobile Electrical Wiring System

Automobile Air-conditioning System Air-conditioning Control System

(61)

Infor Resources System Sdn Bhd (IRSSB)

IRSSB

(62)

(63)

63

Infor Resources System Sdn Bhd (IRSSB) Background

A small setup when it first started in 1996, today Infor Resources System Sdn Bhd (IRSSB) has proven that it has the capability to deliver Professional, Creativity &

Competency based trainings and consulting services to individuals and corporations. Over the 11 years of operation, IRS has build up a knowledgeable network with reputable international organisations, and manages a pool of industry experts in their own field to produce quality and world-class training, research, consultancy and training publication in order to meet the ever- growing needs of our clients.

Our TRAINING DIVISION specialises in the internationally renowned creativity courses of Edward de Bono’s Thinking Systems™, ie. Six Thinking Hats® Method, Lateral Thinking™ Applications, Direct Attention Thinking Tools™, Simplicity™ and the latest Six Value Medals™. In addition, we also specialises in Competency-Based Training and customised trainings on Professional Skills Series, i.e.

Creative Thinking, Leadership &

Management, Retail Operations &

Management, Customer Service

& Sales and Quality & Operational Skills programs.

The PRODUCT DIVISION publishes all-in-one cost effective Train-the Trainer Packages and certifies trainers with license to use these packages.

Apart from this, our CONSULTING DIVISION provides a unique web-based assessment services of Creativity Process Inventory (CPI), Lateral Thinking Test (LTT), Organisational Creativity Factors (OCF) and consultancy services for Training Needs Analysis (TNA).

All our Consultants are qualified,

trained & certified by numerous

international bodies such as the

Malaysia National Vocational

Training Council (NVTC), Australia

National Training Authority (ANTA),

Pembangunan Sumber Manusia

Berhad (PSMB) and others.

(64)

Further Information

Infor Resources System Sdn Bhd (IRSSB) (Competency and Creativity Training Specialist) No. 3-7, Jalan USJ 9/5Q, Subang Business Centre, 47620 Subang Jaya, Selangor Darul Ehsan

Contact : Ms. Intan Nurul ’Ain Kozako / Ms. Jessica Ong Tel : 03-8024 1208

Fax : 03-8024 1203

E-mail : query@irs-flexilearning.com

Website : www.irs-flexilearning.com and www.creativityspecialist.com Core Business

In carrying out the above mission and to achieve the stated objectives, the role of IRSSB would be mainly as a registered provider of training and professional skills development programs for the industry particularly, the Small Medium Enterprises (SMEs).

IRSSB provides a range of specialise trainings, consultings and publication services in developing the human capital as required in SMEs.

Services provided by IRSSB for the SMEs include:

● Edward de Bono creativity and quality thinking programs

● Professional competency & skills development programs

● Retail operation and management programs

● TNA consultancy services

● Providing technical and management services in human capital

development.

(65)

65 TRAINING PROGRAMMES 2009

No Course Name Duration

Days Fees Size

(RM) Dates

2 days

2 days 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

15

8-9 Jan ‘09 8-9 Jun ‘09 14-15 Dec ‘09 17-18 Nov ‘09 11-12 Mar ’09 8-9 Jun ‘09 20-21 April ’09

15-16 Oct ‘09 13-14 April ’09 9-10 Nov ‘09

23-24 Feb ’09 20-21 July ‘09

18-19 May ’09 28-29 Sep ‘09 16-17 Mar ‘09 3-4 Aug ‘09 6-7 April ’09 29-30 Oct ‘09

18-19 Mar ’09 23-24 Jul ‘09 18-19 Feb ’09 29-30 Oct ‘09 1,800

1,800

1,080

1,080 Six Thinking

Hats Methods (STH) Lateral Thinking Applications (LT)

Simplicity (SIMP)

Customer Service Skills (CSS) Creative Thinking Organisation (CTO) Frontline Leadership (FLS) Problem Solving Skills (PSS) Inventory Planning for Retail Stores (IPRS) Merchandise Planning (MP) Retail Stores Design & Display (RSDD) Edward

de Bono (EDB)

Personal, Leadership Skills Development

&

Management

Retail

(66)

(67)

Institute Global Management Sdn. Bhd

IGM

(68)

(69)

69 Institute Global Management Sdn. Bhd.

No. 39 & 41, 1st & 2nd Floor, Jalan USJ 21/10, City Centre, UEP Subang Jaya, 47630 Subang Jaya, Selangor Darul Ehsan Contact : Ms. Kimmie

Tel : 03-8024 0060 Fax : 03-8024 0086 E-mail : oho@pd.jaring.my Website : www.igm.edu.my

Further Information Institute Global Management Sdn. Bhd

Background

Established in 1993, Institute Global Management (IGM) is one of the pioneer Life Long Learning Institutions in Malaysia, which focuses on action-learning methodology mainly for working executives. IGM is registered with the Malaysian Ministry of Higher Learning and its programs are approved by Malaysian Qualification Agency (MQA). IGM have trained and examined over 15,000 managers

in management education from Skill Certificates, Diploma to MBA programs.

Today’s IGM have re-engineered itself to be the leading life long learning college in Malaysia with a focus to develop SMI/SMEs to be equipped with the cutting edge soft skills. IGM have in the past two years plus trained and coached over 2,000 executives, managers and entrepreneurs for the SMI/SMEs. As such, IGM’s charter is as follows:

Vision

To be the Leading Life Long Learning College in Malaysia!

Mission

Shaping Market Leaders!

(70)

No. Course Name Fees Duration (RM) Class

Size Date

1,400

1,200 1,400 2,985 1,200 1,400

1,400

1,400 1,200 1,400

1,400

2,985 2,985 2,985

2,985 2,985 1,400 1,400

1,400

1,400 1,400 2 days

2 days 2 days 4 days 2 days 2 days

2 days

2 days 2 days 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

12 Mar/4 Jun/

6 Aug/5 Nov 15 May/10 Oct 24 Jul 15 Jul/24 Sep 23 Feb/20 Jul 12 Jan/23 Mar/

13 Apr/26 Aug 19 Feb/2 Apr/

3 Sep 15 Apr 2 Jul/11 Sep 18 Mar/8 Apr/

18 May 16 Mar/6 Apr/

11 May

24 Jun 18 Aug 9 Jun/6 Oct/

10 Nov 8 July 25 March

20 May 17 Jun/21 Oct

15 Jun/14 Oct 14 Aug 18 Sep 20

20 20 20 20 20

20

20 20 20

20

20 20 20

20 20 20 20

20

20 20 Blue Ocean Strategy

Break Out Strategy

Developing a Market Driven Organization Developing an Effective Marketing Plan English for Frontliners

Marketers Mindset Change for Business

Mastering Creative Innovations

Maximizing Market Communication Power Image Branding

Retail Customer Service

Retail Selling

Skill Certificate in Customer Account Management

Skill Certificate in Customer Care Skill Certificate in Customer Service

Skill Certificate in Effective Selling Skill Certificate in Managing Sales Skill Certificate in Merchandising Skill Certificate in Strategic Retail Marketing

Skill Certificate in Strategic Retail Positioning

Strategic Brand Building Team Building to Build a Cohesive Marketing/Sales force

Training Schedule for Year 2009

(71)

Institute of Marketing Malaysia

IMM

(72)

(73)

73

Institute of Marketing Malaysia Background

The Institute of Marketing Malaysia (IMM) is the only registered Institute in the country established for the purpose of serving the marketing fraternity in Malaysia. IMM was founded in 1977 by YBM Tengku Razaleigh Hamzah who also became the Institute’s first Patron.

Currently the Patron of IMM is YB.

Tan Sri Muhyiddin Mohd. Yassin, Minister of International Trade and Industry.

As the national professional body for sales and marketing practitioners, IMM’s mission is to promote marketing as a philosophy of business, to enhance the professional standards of marketing practices and to be the leading centre for marketing in the region.

Further Information

Institute of Marketing Malaysia

1G – 1st Floor, Bangunan SKPPK, Jalan SS 9A/ 17, 47300 Petaling Jaya, Selangor Darul Ehsan, Malaysia Contact : Dato’ Sharifah Mohd. Ismail

Tel : 03-7874 3089 / 013-340 3532 / 012-335 7615 Fax : 03-7876 3726

E-mail : sharifah@imm.org.my / sharifahsmi@yahoo.com/info@imm.org.my Website : www.imm.org.my

IMM is a Training Provider (Class B) registered with Pembangunan Sumber Manusia Berhad (PSMB).

IMM is also the Professional Training Provider for SMIDEC in supporting Malaysian’s SMEs and human capital development.

IMM is affiliated to the esteemed Asia

Marketing Federation (AMF) as well

as the World Marketing Association

(WMA). IMM and its members

currently have global access to

a truly international platform for

marketing networks, which is a

valuable ‘infrastructure’ for building

business in the emerging, borderless

world.

(74)

No. Course Name Duration

Days Fees Size

(RM) Dates

2 days

2-3 days

2 days

3 days

2 days

2 days 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35

Min : 15 Max : 35

Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35 Min : 15 Max : 35

To Be Advised

To Be Advised 400/day

400/day

400/day Marketing Management

Analyzing Market Opportunities Through Marketing Research Developing Marketing Plan

Marketing Communication

Understanding Customer Behavior

Customer Centricity for Technical Front Liners Entrepreneurship and Business Plan Development

Venturing into Franchise Business (A Franchise Perspective)

Retail Store Marketing Strategy

Home-Based Business Start- Up

Women in Sales

Sales Management

Professional Selling Skills

Professional Selling

Conducting Market Analysis

Courses offered to SMEs 2009

SALES & MARKETING

(75)

Johor Skills Development Centre (PUSPATRI)

PUSP A TRI

(76)

(77)

77

Further Information Johor Skills Development Centre (PUSPATRI)

Background

Johor Skills Development Centre was set up in 1993 with the objective to provide continuous technical training and skill upgrading of industrial workforce. The centre which is located in Pasir Gudang, Johor is an approved training provider of Small and Medium Industries Development Corporation (SMIDEC), Pembangunan Sumber Manusia Berhad (PSMB), Department of Skills Development, Energy Commission and Ministry of Entrepreneur and Co-operative Development.

Johor Skills Development Centre (PUSPATRI)

PLO 2 Jalan Perak 4, Kawasan Perindustian Pasir Gudang 81700 Pasir Gudang Johor

Contact : Ms. Muzalifah bte Md Noh Tel : 07-2521606 / 08

Fax : 07-2521722

E-mail : puspatri@tm.net.my

Website : www. puspatri.edu.my

(78)

Course Name Days Fees

(RM) Dates

3 days

4 days

3 days

4 days

3 days

05-07/01/09 17-19/02/09

02-04/02/09 22-24/04/09

16-18/03/09 19-21/05/09

19-22/01/09 17-20/03/09

10-13/03/09 19-22/05/09

17-20/02/09 14-17/04/09

14-17/04/09 15-18/06/09

03-05/03/09 12-14/04/09

16-19/03/09 09-12/06/09

07-09/04/09 27-29/05/09

24-26/03/09 09-11/06/09 750

780

800

750

800

850

1,200

850

1,000 Industrial Pneumatics

Industrial Electro Pneumatics

Advanced Electro-Pneumatics

Programmable Logic Controller

Plc Mitsubishi With Medoc / Fxgpwin Software

Plc National (Nais) With Npst Software

Plc Omron With Sysmac Support Software (SSS) - Part 1

Plc Omron With Sysmac Support Software (SSS) - Part 2

Plc Omron With Programming Software-Syswin And Cx- Programmer

Maintenance And Trouble Shooting Of Plc

Plc Siemens Simatic S7-200

SCHEDULE OF COURSES 2009

No.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

(79)

79

Course Name Days Fees

(RM) Dates

3 days

5 days

3 days

2 days

3 days

06-08/04/09 17-19/06/09

16-18/03/09 10-12/06/09

09-13/02/09 11-15/05/09

24-26/02/09, 22-24/04/09

10-12/03/09 18-20/05/09

24-25/02/09 13-14/05/09

10-11/03/09 18-19/06/09

07-09/04/09 27-29/05/09 1,200

1,000

700

1,000

600

700 Plc Sie