Tekspenuh
http://www.sciencedirect.com/science/article/pii/S0272884215004010
http://ac.els-cdn.com/S0272884215004010/1-s2.0-S0272884215004010-main.pdf?_tid=5641b2b4-4011-11e5- 8402-00000aacb360&acdnat=1439288071_b9276a5d3fc0c54a52983ef2bc31976f
DOKUMEN BERKAITAN
Generally, cold plasma can enhance mechanical properties, electrical properties, wetting, dyeing and printing, treatment, metal-coated organic polymers, improve adhesion
In this study, it was to study the effect of plasticizer on the mechanical properties of three-dimensional (3D) printed polylactic acid (PLA) blend system, for
EFFECT OF ANNEALING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 0.06% CARBON
The aim of this research is to study the effect of process parameter such as layer thickness, infill density and object orientation to the accuracy of printed
1) The results showed for all the fabricated nano bio-composites systems, that output performance parameters, including the compression fracture strengths, the micro-Vickers
In this study, surface roughness and tensile strength of 3D printed ABS specimens were evaluated at 0.1, 0.2 and 0.3mm layer height setting in combination with two printing
Chapter 4 discusses on the effect of feldspar loading on the mechanical, thermal and morphological properties, the effect of compatibilisers and coupling agents on the
Five response to be considered for printing parameters studies, which is ultimate tensile strength, compressive modulus, surface roughness, dimensional accuracy and
