Code Name Title of Paper Org.
DAY 2: 23 November 2011 Session 1(C) – Polymer and Composites
C-01 Nurul Ilham Adam Conductivities Studies on Natural Rubber (NR) Grafted With 30% Poly(Methyl Methacrylate)
Composite Polymer Electrolytes.
UiTM SA
C-02 Siti Nor Hafiza Mohd Yusoff
Conductivity and Thermal Studies Based on Deproteinized Natural Rubber/Li-salt.
UiTM SA C-03 Mou'ad.A.Tarawneh Mechanical Properties of TPNR-MWNTs-OMMT
Hybrid Nanocomposites.
UKM C-04 Fadilah
Fadilah Binti Abd Wahab
Investigation on the Effects of Addition of Graphene in P3HT:PCBM Polymer Solar Cells.
UM
C-05 Nur Hamizah Binti Mohd Zaki
Ionic Conductivity and FTIR Studies of Plasticized 30% Methyl-Grafted Natural Rubber.
UiTM SA C-06 Amirah Hashifudin Properties of solid solution electrolyte of
Poly(ethylene oxide)/ Plyacrylate blends and lithium perchlorate.
UiTM SA
C-07 Zaidatul Salwa Binti Mahmud
Ionic Conductivity and Thermal Studies of Alkaline Gel Polymer Electrolyte Based 49% Poly(methyl
methacrylate)-Grafted Natural Rubber.
UiTM SA
C-08 Rohani bt. Abu Bakar Effect of Methyl Methacrylate Content in Carbon Black Filled Natural Rubber Compounds.
MRB Lunch
Session 1I (C) – Optical and Dielectric Materials
C-10 Woon Kai Lin Influence of Series Resistance, Shunt Resistance and Interface Properties on Fill Factor of
P3HT/PCBM Organic Photovoltaic.
UM
C-11 Siti Nor Ain Binti Rusly Effect of Sm-doping on Magnetic and Dielectric Properties of BiFeO3.
UPM C-12 Azman B.Kasim VIS-NIR emission spectroscopy of the TeO2-PbO-
Li2O-Nd2O3 glass system under 585nm excitation.
UiTM Phng C-13 Syaridatul Akmar Binti
Roslan
Optical Absorption of Er3+/Nd3+ Co-Doped Tellurite Glass.
UTM C-14 Zarina Aspanut Effect of Rapid Thermal Annealing on the
Structural and Optical Properties of Au/SiOx multilayer Films.
UM
Tea Break Session 1II (C) – Optical and Dielectric Materials
C-15 Norezan Ibrahim Effcet of (Ba0.6Sr0.4)TiO3 Doping on Dielectric Properties of CaCu3Ti4O12 (CCTO).
UiTM SA C-16 Rozilah Rajmi Elastic and Dielectric Properties of CaCu3Ti4O12
(CCTO) - MgTiO3 Dielectric Ceramics.
UiTM SA
DAY 3: 24 November 2011 Session 1V (C) – Metals and Alloys
C-18 Aljameel, Abdulaziz Ibraheem A
The Effect of In Concentration on the Optical Lattice Vibrations in Quaternary AlxInyGa1-x-yN
Alloys.
USM
C-19 Ramani Mayappan Wetting and Intermetallic Study between Sn-3.5Ag- 1.0Cu-xZn Lead-free Solders and Copper Substrate
(x = 0, 0.4, 0.7).
UiTM Pls
C-20 Iziana Binti Yahya Characterization of Sn-3.5Ag-1.0Cu Lead-free Solder Prepared via Powder Metallurgy Method.
UiTM Pls C-21 Sri Harjanto Characterization of Cu-15Zn Metal Foam Produced
by Solid Fabrication.
UI (Indonesia) C-22 Abdul Razak Daud Microstructure and Phases of As-Cast and Heat-
Treated Al-Si-Mg/AlN Composites Prepared by Stir Casting.
UKM
Tea Break and Poster Session 2 Session V (C) - Metals and Alloys
C-23 Nurul Atikah High Temperature Corrosion of Fe-30Cr in Flowing CO2 Gas.
UKM